KORE DESIGNArchitecture · Interior · Delivery

04.1 / REAL SITE ARCHIVE

SITEREAL SITE ARCHIVE

This is not a stock library or an unedited photo dump. Authentic sites are organised by trade, from concealed work, walls and drywall through final installation and bespoke joinery.

AUTHENTIC WORKSITE RECORD

A site need not be perfect,
but the evidence must be real.

Images retain the actual condition of each construction phase; only cropping, tone and numbering are standardised. Filter by trade to keep the evidence focused.

KORE real site: Wall flatness checkREAL SITE / RS-01WALL
RS-01

Wall flatness check

A long straightedge verifies the substrate before deviations reach the finish.

KORE real site: Electrical plate alignmentREAL SITE / RS-02ELECTRICAL
RS-02

Electrical plate alignment

Level, spacing and the relationship to the finish are checked during installation.

KORE real site: Distribution board wiringREAL SITE / RS-03ELECTRICAL
RS-03

Distribution board wiring

An authentic record of circuit organisation, connections and subsequent testing.

KORE real site: Substrate for complex formsREAL SITE / RS-04DRYWALL
RS-04

Substrate for complex forms

Curves, light positions and openings are coordinated within one board-joint logic.

KORE real site: Large-scale drywall installationREAL SITE / RS-05DRYWALL
RS-05

Large-scale drywall installation

Walls, steelwork and MEP systems progress together in a commercial interior.

KORE real site: Wall substrate and servicesREAL SITE / RS-06WALL
RS-06

Wall substrate and services

Wall construction and service routes are recorded before being concealed.

KORE real site: Painting phaseREAL SITE / RS-07WALL
RS-07

Painting phase

Painting follows substrate completion while electrical points await final installation.

KORE real site: Distribution board verificationREAL SITE / RS-08ELECTRICAL
RS-08

Distribution board verification

Circuits and operational logic are checked after installation.

KORE real site: Final electrical platesREAL SITE / RS-09ELECTRICAL
RS-09

Final electrical plates

Plates are aligned and tested after cabinetry and walls are complete.

KORE real site: Curved junctionREAL SITE / RS-10DRYWALL
RS-10

Curved junction

A continuous curved edge creates a clean line for the final light and finish.

KORE real site: Joinery trial assemblyREAL SITE / RS-11JOINERY
RS-11

Joinery trial assembly

Connections, loads and component fit are checked against the drawings.

KORE real site: Bespoke surface finishingREAL SITE / RS-12JOINERY
RS-12

Bespoke surface finishing

Assembly, sanding and timber finishing are completed at the same bench.

KORE real site: Lighting in the completed spaceREAL SITE / RS-13JOINERY
RS-13

Lighting in the completed space

Final installation returns to the whole space to verify scale, brightness and visual order.